The body of the browse

    Emptying eye washer
    add time:2018-3-19 17:19:39 Reading:0next

    Model: BH30-5012

    1. Material: 304 SS; thickness: 3MM.Automatic emptying device. Water comes out when user steps on the foot pedal and open the hand plate. When user closes the hand plate, the outlet valve will close automatically and rest water in tubes will discharge directly. No additional operation needed. Thus device can work in freezing weather.

    2. Working pressure: 0.2-0.4MPA.

    3. Process: Polishing processing, high brightness, corrosion resistant.

    4. Eyewash dust cover: soft rubber, can prevent secondary damage; stationary cover, close it after usage, not easy to loss and cleaner than chain type dust cover.

    5. Eyewash water regulating device: adjustable flow device, can adjust the flow at any time and effectively make the eyewash water cross on the 203mm height and ensure the flow to be 16-18L/min (please make sure that the water pressure at the scene is 0.25mpa).

    6. Eyewash filter: High density PP+304 double filter, can effectively filter impurities in waterand make the water foggy and soft.

    7. Eyewash assembly: 304 SS casting parts with fine finish, 90°bend tube is Seamless tube, will not burst when water pressure is high.

    8. Eyewash basin: 1MM thickened straight edge basin, can gather water more effectively and prevent spray splashing.

    9. Shower basin: 304 SS, diameter 260mm, thickness 0.6mm, 360° rotating sprayer, large coverage, meet and exceed ANSIZ standard (spraying diameter should be more than 508mm at the height of 1524mm). Shower flow is 180L/min.

    10. Shower ball valve: inner diameter 24mm, outlet flow can be 172L/min at water pressure 0.25Mpa; eyewash ball valve: inner diameter 15mm (gaskets at both sides), outlet flow can be 24.8L/min. Both valves are two-chip ball valves, which are better than one-chip ball valves. Large aperture can meet the ANSIZ standard (shower75.7L/min, eyewash11.4L/min).

    11. Tubes: Inside and outsidepolished 304 SS tube, thickness is 3MM.

    12. The base: new type base with big foot pedal, easy to disassemble and fixed firmly.Laser cutting/line cutting processing makes the precision enhanced, avoid problems happened on other suppliers products or on our old types such asnot flexible, empty ball valvepositioning not accurate and leakage. Material: 304 SS.

    13. Water inlet and outlet: 5/4screw thread (can be customized), middle inlet type (can be customized).

    14. Performance: good resistance of acid, alkali, salt, oil and other corrosive solutions.

    15. Functions: Used in petroleum, chemical, beverage, pharmaceutical and other industries. Quickly rinse to reduce damage at first time when chemical liquid, toxic and harmful substances and fire splash to staff’s body, face and eyes.

    16. Optional configurations: Emptying devices; 316 SS material; flange connection; variable diameter joint; water source filter; foot pedal, etc.

    17. Standard: ANSIZ358.1.2009.

    18. Packing details: Carton (1850px*700px*575px), 1 piece/carton

    Previous Article: Buried eye washer
    next chapter: Compound eye washer(ABS)

    Print this page || Close the window